| Model | SS-G001 | 
| Case Material | SS304(1.2mm, 1.5mm, 2.0mm optional) | 
| Arm Material | SUS304 | 
| Production Process | CNC Laser Cutting | 
| Size | 1200*500*500mm(Customization acceptable) | 
| Power input | AC100-240V,50/60HZ | 
| Operation voltage | DC24V, 3A, Power: 40W | 
| Electromagentic | Duty Cycle 100% | 
| Barrier Arm Length | 500mm | 
| Passage Width | 600mm | 
| Passage direction | Single directional/Bi-directional(Optional) | 
| Operating time | 1S | 
| Throughput Rate | 25-30 persons/minute(Normally Closed) or 40 persons/(Normally Open) | 
| Reset Time after Power on | 3S | 
| MCBF | 5,000,000 Cycles | 
| Automatic Reset Function | Automatically locked within set time(Time Adjustable) | 
| LED Indcator | Yes | 
| Operation Humidity | 0~95%(No Freezing) | 
| Operation Temperature | -10℃~+50℃ | 
| Operation Eenvironment | Indoor,Outdoor(Shelter) | 
| Protection Level | IP45 | 
| Communication Interface | Standard RS485 interface, distance ≤1200 meters | 
| Input Interface | Relay switch signal or 12V electrical level signal or 12V pulse signal of pulse width > 100ms, drive current >10mA | 
| 담당자 : | alice yang | 
|---|